Steel Body Parts
55 MG MGA
| Replacement body parts are quality steel replacement parts that are made overseas. Having been shipped half way around the world by ship and then by truck, there will most likely be a few scratches or small dents, this cannot be helped and should be expected. A small amount of repair may be required. All body parts are packaged and handled with great care. -T after a part number means that part must be shipped Truck Freight. The prepaid order will include an $125.00 charge for delivery in the 48 contiguous United States. Orders outside of the 48 states will be quoted. | ||||||||
| * After the sell price means Oversized Part. Your order will incur a charge of $20.00. When ordering multiple oversized parts only one Oversize Part Charge of $20.00 will be applied to your order. | ||||||||
| PART | ILL# | DESCRIPTION | APPLICATION | REQD | LIST | SELL | ||
| (1) | HOOD | MGA | 55-62 | (1) | 2499.94 | 1999.95 | * | |
| (2) | SHROUD-FRONT | MGA RSTR | 55-62 | (1) | 3124.94 | 2499.95 | ||
| (3) | FRONT VALANCE-FIBERGLASS"A" | MGA | 55-62 | (1) | 162.44 | 129.95 | ||
| FRONT VALANCE-STEEL | MGA | 55-62 | (1) | 587.44 | 469.95 | |||
| (4) | FENDER-FRONT-LH "B" | MGA | 55-62 | (1) | 2374.94 | 1899.95 | ||
| (5) | FENDER-FRONT-RH "B" | MGA | 55-62 | (1) | 2374.94 | 1899.95 | ||
| (6) | DOOR ASSEMBLY-LH | MGA RSTR | 55-62 | (1) | 1749.94 | 1399.95 | * | |
| DOOR ASSEMBLY-RH | MGA RSTR | 55-62 | (1) | 1749.94 | 1399.95 | * | ||
| (7) | OUTER SILL-LH | MGA | 55-62 | (1) | 87.44 | 69.95 | ||
| (8) | OUTER SILL-RH | MGA | 55-62 | (1) | 87.44 | 69.95 | ||
| (9) | REAR FENDER-LH "C" | MGA | 55-62 | (1) | 1249.94 | 999.95 | ||
| (10) | REAR FENDER-RH "C" | MGA | 55-62 | (1) | 1249.94 | 999.95 | ||
| (11) | TONNEAU PANEL | MGA RSTR | 55-62 | (1) | 2374.94 | 1899.95 | ||
| (12) | TRUNK LID ASSEMBLY | MGA | 55-62 | (1) | 1499.94 | 1199.95 | * | |
| (13) | REAR VALANCE | MGA | 55-62 | (1) | 1037.44 | 829.95 | * | |
Left Hand (LH) and Right Hand (RH) Means As You Sit Facing Forward In The Car
| Note | "A" | This is a fiberglass panel, the only one we supply. |
| "B" | MGA original steel fenders are no longer available. Ours are hand-made, high quality reproductions made of heavy gauge steel. Some finishing is required, e.g. drilling of bolt holes and modifications for the windshield post. | |
| "C" | New reproduction pressed steel fender; primered and drilled for bolt holes. You will have to fill, grind and smooth to complete finish. |